Our range of FICFOG atomising nozzles i.e. 0,8mm, 1mm and 1,2mm orifices, and an appropriate project design will provide you the most suitable and efficient solution, to fulfil your business needs and requirements.
The smaller the FICFOG exit orifice diameter is, the lower the FICFOG nozzle compressed air consumption will be, and the shorter the atomising spray distance will be.
The larger the FICFOG exit orifice diameter is, the higher the FICFOG nozzle compressed air consumption will be, the finer the droplet size will be (down to 5microns average droplet size), and the longer the atomising spray distance will be.
The 0,8mm orifice FICFOG nozzle is recommended for the following sector types:
- for installations larger than 10.000m2 within the intensive agriculture sector
- for installation larger than 750m2 within the farming sector
- for industrial installations when a minimum of 3,5bar air pressure is available at client site.
The 1mm orifice FICFOG nozzle is recommended for the following sector types:
- for installations smaller than 10.000m2 within the intensive agriculture sector
- for installations smaller than 750m2 within the farming sector
- for industrial installations
- for leisure / residential installations
The 1,2mm orifice FICFOG nozzle is recommended for the following sector types:
- for research and development projects
- for industrial installations smaller than 250m2
- for leisure / residential installation with less than 15nozzles
|
